Tile Leveling System

Tile Leveling System (Quick-Adjustment Type)‌

‌Placing the Leveling System‌

Position the tile leveling system at the four corners or gaps between tiles, ensuring full contact with the tile surface.

‌Adjusting Height‌

Use the adjustment knob or press head to align the tile height with adjacent tiles, then verify flatness with a leveling ruler.

‌Securing and Removal‌

After the adhesive dries, gently remove the leveling system to avoid damaging the tiles.

‌Key Considerations‌

‌Base Preparation‌: Clean the base layer thoroughly before installation to remove dust and debris, ensuring optimal flatness.

‌Tile Soaking‌: High water-absorption tiles require 2 hours of pre-soaking to prevent hollowing;  low-absorption tiles (<0.5%) do not need soaking.

‌Joint Requirements‌: Maintain 1-3mm gaps between tiles (wider for rustic tiles) to accommodate thermal expansion and prevent cracking